Mr Gasket Throttle Cable

Are you looking to upgrade or replace the throttle cable on your vehicle for better performance and throttle response? then you can’t go wrong with a Mr Gasket throttle cable. Mr Gasket is one of the leading brands when it comes to high performance throttle cables. In this detailed guide, we’ll walk you through everything you need to know about buying the ideal Mr Gasket throttle cable for your ride.

What is a Throttle Cable and Why Do You Need a Good One?

The throttle cable is one of the most important components that connects your gas pedal to the throttle body and controls the air intake into the engine. A high quality throttle cable makes a big difference in throttle response and engine performance. The cable needs to be durable enough to handle constant movement but also flexible for smooth operation.

With a poor quality throttle cable, you may experience:

• Delayed or jerky throttle response when pressing on the accelerator
• Sticking, binding, or jamming of the throttle
• Wear and fraying of the cable
• Damage to the cable housing
• Rusted or corroded cables

Upgrading to a Mr Gasket throttle cable addresses all these common issues and gives you:

• Ultra smooth and instant throttle response
• Precise throttle control for better acceleration
• Durability to handle repeated flexing and vibration
• Corrosion resistance for long-lasting performance
• Ability to handle higher RPMs without binding up

The right throttle cable makes a huge difference in how your engine performs and responds. Mr Gasket cables deliver unmatched response and control.

Features to Look for in a High Performance Throttle Cable

Here are the key features to look for when choosing a throttle cable for your vehicle:

• Smooth PTFE lined housing – The inner housing contains PTFE liners that allow for extremely smooth movement without binding or sticking. This allows maximum response.
• Corrosion resistant – Mr Gasket cables feature stainless steel, zinc plated, or aluminum coated components that resist rust and corrosion even in harsh conditions.
• High temperature resistance – The housing and liner materials can withstand high temps from the engine without warping or burning.
• Protective casing – The outer casing resists abrasions and tears for extended durability.
• Firm casing attachment – The ferrules and housing ends attach firmly to prevent detachment from vibration.
• Flexible enough for tight bends – The ideal cable can flex smoothly around tight radiuses without kinking.
• Easy installation– Quality cables come with all required hardware for straightforward installation.
• Smooth inner wire – The cable’s inner wire has a slick coating for reduced friction and binding.

When searching for a Mr Gasket throttle cable, look for one that has all these features for the very best performance, response, and durability.

Mr Gasket Throttle Cable Product Options

Mr Gasket offers a wide range of throttle cables so you can find the perfect one for your vehicle and application. Some top options include:

• Pro-Street Cable – This ultra flexible cable is PTFE lined and made for high performance vehicles. It works with tight radiuses and high RPMs.
• Unistyle Cable – A firm PTFE lined housing and smooth inner wire make this ideal for custom applications. Fits a range of carburetors.
• Vari-Fit Cable – With adjustable ends and a double PTFE liner, this cable fits most vehicles and allows fine tuning of adjustment.
• Universal Cable – This comes in various lengths with aluminum ferrules to work with many throttle linkages and pedals.
• Direct Fit Cables – For many specific vehicle makes and models, direct fit cables are designed to perfectly match OEM cables.
• Braided Stainless Cables – For exposed applications, these flexible braided cables work well and resist corrosion.

No matter what cable style your vehicle requires, Mr Gasket likely offers an ideal solution. They manufacture cables forstreet rods, muscle cars, imports, OEM upgrades and more.

How to Determine the Correct Mr Gasket Throttle Cable for Your Vehicle

Choosing the right throttle cable takes a bit of research to identify one that fits your particular vehicle and application. Follow these steps:

• Consult your owner’s manual – The manual will often list the OEM part number and length you need. This is the easiest way to determine what cable will fit.
• Measure the existing cable – If you currently have a cable installed, measure its full length and note the diameter of the ends. This helps find a matching cable.
• Identify your linkage connections – Note where the cable housing terminates and what style of studs it connects to on the throttle body and throttle pedal.
• Factor in rod lengths– If you use threaded rods to connect the cable, measure them and add those lengths.
• Consider cable routing – Think about how the cable is routed and note any tight radiuses it must flex around. This determines the necessary flexibility.
• Contact Mr Gasket support – Their experts can help you identify the perfect fitting cable based on your vehicle info and requirements.

Taking the time to gather these details ensures you select a throttle cable that bolts up and performs flawlessly with your particular application.

Installation Tips for Mr Gasket Throttle Cables

Installing a new Mr Gasket throttle cable is usually a straightforward process, but here are some tips to make it go smoothly:

• Use a factory service manual – Follow the step-by-step instructions specific to your vehicle for proper process.
• Disconnect the battery – Always disconnect the negative battery terminal before working near the throttle body.
• Check for binding– Make sure the cable housing routes cleanly without binding before locking it down.
• Lubricate components – Use a bit of light oil or lubricant on the cable ends, adjuster nuts, and throttle body parts.
• Adjust cable slack – Adjust slack per instructions so you have proper pedal to throttle body movement.
• Confirm full throttle opening – Have an assistant fully depress the pedal while you confirm full throttle body opening.
• Tighten all hardware – Carefully tighten down all brackets, house clamps, nuts and bolts to avoid loosening.
• Road test the vehicle – Test drive it and make any minor adjustments to achieve smooth acceleration.

Following the proper steps takes the frustration out of installation. Take it slow and double check your work for best results.

Troubleshooting Common Mr Gasket Throttle Cable Problems

If you experience any issues with your Mr Gasket throttle cable, here are some common problems to check:

• Binding cable – This can occur if the cable is bent too sharply. Try re-routing the housing to allow smoother bends.
• Sticking throttle – Frayed or damaged cable liners can cause it to stick intermittently. Replace the cable.
• Loose connections – Check all clamps and fittings. Tighten or replace any that are loose or damaged.
• Damaged housing – Look for crushed, kinked or cracked outer housing. Replace any damaged sections immediately.
• Throttling not opening fully – Adjust cable slack and check linkage connections. The cable may need to be shortened.
• Seized adjuster nuts – Disconnect and soak adjuster nuts in penetrating oil. Replace any seized parts.
• Contaminated cable – Clean out the cable housing and liners if dirt or debris has entered.
• Disconnected ends – Verify the cable seat firmly in brackets. Replace loose or broken ferrules.

Quickly diagnosing the root cause of issues with your Mr Gasket throttle cable gets you back on the road faster.

Maintenance Tips to Extend the Life of Your Throttle Cable

To keep your Mr Gasket Throttle Cable running smoothly for years to come, follow these key maintenance practices:

• Lubricate the cable – Use a lightweight lubricant designed for throttle cables and work it into the liners.
• Check for damage frequently – Look for crushing, kinking, cracking, looseness and corrosion of the housing.
• Avoid excessive tight bends – Route the cable with smooth bends to prevent binding and wear.
• Keep the ends clear of debris – Use compressed air to clear away any collected dirt around the cable ends.
• Check adjustment – Re-adjust the cable slack if throttle response feels sloppy or inconsistent.
• Confirm firm connections – Snug down any brackets that have loosened over time due to vibration.
• Consider periodic replacement – Depending on your driving style and conditions, consider replacing the cable every few years.

With proper care and maintenance, a quality Mr Gasket throttle cable should deliver years of crisp, responsive throttling and engine control.

Where to Buy Genuine Mr Gasket Throttle Cables

You can purchase authentic Mr Gasket throttle cables from:

• Auto parts stores – Major chains like AutoZone, O’Reilly Auto Parts, and Advance Auto Parts typically stock Mr Gasket cables.
• Performance retailers – Summit Racing Equipment, Jegs, and Speedway Motors offer wide selections of Mr Gasket cables.
• eBay – Both new and used Mr Gasket throttle cables can be found on eBay stores and listings.
• Amazon – Amazon Marketplace sellers provide a wide range of new and used Mr Gasket cables with quick shipping.
• Mr Gasket website – You can buy direct from Mr Gasket and take advantage of seasonal discounts and sales.
• Local auto shops – Smaller specialty performance shops often stock various Mr Gasket parts and accessories.

Stick with genuine Mr Gasket brand cables over no-name imitations for quality you can rely on. With the right cable, you’ll get silky smooth throttle response and optimal engine performance.

Reviews of Mr Gasket’s Throttle Cables

Mr Gasket has built a reputation for making some of the best performance throttle cables on the market. Here are excerpts from enthusiast reviews:

• “I installed a Mr Gasket Pro-Street cable on my ’67 Mustang fastback and it made a world of difference. Throttle response is night and day compared to the old worn out stock cable. Couldn’t be happier with how smooth it operates.”
• “Putting Mr Gasket’s unistyle cable on my pickup was the best upgrade I’ve made. My old cable used to stick and throttle response was erratic. Now it’s super precise with no sticking or binding in the housing. Highly recommended upgrade!”
• “I’ve used Mr Gasket throttle cables on my last 3 project car builds and they’ve never let me down. Great quality and they hold up well even in my off-road rock crawler that stresses parts to the limit. Worth the extra money over cheap generics.”
• “The Mr Gasket direct fit cable I ordered was identical to the factory one I needed to replace on my classic Firebird. Bolted right up, looked totally stock, but performance is worlds better over the OEM cable. Very impressive product.”

The consensus among reviews is that Mr Gasket delivers some of the smoothest and most responsive cables money can buy. Expect a marked improvement over most stock OEM cables.

FAQ About Mr Gasket Throttle Cables

How do Mr Gasket cables compare to OEM cables?

Mr Gasket cables are made with higher quality materials and manufacturing than factory cables. They feature smooth PTFE housing liners and anodized aluminum fittings which help them outperform OEM cables in responsiveness and durability.

Will a Mr Gasket cable fit my vehicle?

They make direct fit cables for many vehicle applications and also have universal cables that can adapt to fit most set ups. Their cables work with carbureted, fuel injected, diesel, and specialty engines.

How difficult is it to install a new throttle cable?

Installation is usually simple especially when replacing an existing cable. You just connect the new Mr Gasket cable to the same throttle linkage points as the factory cable. Their instructions provide all the steps.

Will a throttle cable improve performance?

Yes, a smooth operating high quality cable like Mr Gasket’s results in much crisper throttle response which helps acceleration and overall engine performance.

How long do Mr Gasket throttle cables last?

Properly maintained, a Mr Gasket cable should last 50,000 miles or more depending on your driving style. Their cables hold up better than factory parts in extreme conditions.

Upgrading your throttle cable to a Mr Gasket part is one of the easiest ways to get better throttle response from your engine. Their cables deliver incredibly crisp, precise control that makes a huge difference in acceleration and performance. Follow the recommendations in this guide to select the perfect Mr Gasket throttle cable for your vehicle.